We understand you are starting your learning journey. Hence, the program is designed to cover the basics - good for even folks with prior knowledge. The only prerequisites are that you understand physics and maths taught till 12th standard or diploma.

An Internship is for college students to learn the basics of the Industry. A good starting platform to meet the university's internship requirement along with real learnings.

Whereas a Course is much detailed program on the technologies used in the industry. It has industrial projects, much more detailed content, an LoR and career-related sessions. It is meant for students and industry folks who are looking to upgrade themselves for jobs or higher studies.

Once you have registered for the course and paid for the program, we will share with you the login details to study the portal of Elite Techno Groups where you can access the course. 

It is a combination of recorded and live interactive sessions with the Experts.
Course content is delivered via recorded videos so that you can have them all the time with you. These will help you plan your learning accordingly given the uncertainties in the college opening and exams!

We will be majorly focusing on commercial & performance race four-wheelers.

You will be learning -
Solidworks For Design, FEA and other analysis,
Lotus for suspension analysis,
Ansys Fluent for CFD, and
Ansys for FEA

If you don't have the software, you can download the software from open-source online sources. Given the minimal course fees, the software isn't included in the fees.

No problem at all. We will teach you from scratch. It doesn't matter if you haven't used any CAD software. Designing will be starting from very basic things like- learning of all the commands used in it, after that we will be teaching you how to design the subsystems as you continue with the course.

Yes, in fact, the whole course is practically based. Practical means which you practice which could be either Hands-on or on Computer. In the Automotive Industry, work is divided into 2 major domains.
1. Engineers who design the vehicles by doing the research as per the market need - vehicle dynamics & design engineer - 80% of Engineers required in this space
2. Engineers in manufacturing unit - an automated and outsourced process - require 20% of engineers.

The focus of this course is on the 80% requirement where we will teach you the design and development of commercial and race vehicles from scratch.

We think doubt resolution is the most important part of any course. Hence, we've three channels for you to get your doubts resolved- 
1. Ask us doubt on the Video platform itself and we will reply to you there
2. A chat group for doubt resolution, you could ask us there
3. Live doubt resolution sessions, you could ask you doubts there too!

After the course:  Definitely, you will have plenty of doubts after the course and for that, we provide you with dedicated email id of our experts, you can get their assistance through the mail to clarify all your issues."

We do provide you Resume and LinkedIn profile sessions that can help you in your placements.

Getting a job depends on multiple factors apart from your technical skills like aptitude skills and the company's requirements. This course helps you build your technical skills. Also, most students don't just stop here after the course. They go ahead and participate in various activities, competitions, and research which makes them industry ready! This is the first important step in your career journey to push you to become industry-ready.

To help you improve industry-related technical skills, we also give you a 30-day online-based Industrial designing project without any fee, under the guidance of mentors from the research team.

Yes, we will provide you support for 1 year.

You will get a Completion certificate, a Project report. And top-performers will get a Letter of Recommendation (LoR)

• The certificate of participation will be issued at the end of the course period.
• The performance report will be sent on the completion of the course.
• The LOR will be sent on the completion of the course to the top performers.

Completion means you should have watched all the videos, attempted all the quizzes and the projects.

The top performers are the ones who have scored above 85% overall across all quizzes and projects.

We don't conduct any tests before we issue you a certificate. You have to watch all the tutorials and classes shared by us to get the certificate.

We will provide you an international (UK) accredited e-certificate with an online unique verification number that your college or company you will be working with can use to check your certificate details online, a lifetime. Additionally, you can take a print of your certificate from anywhere.

We will provide you an international (UK) accredited e-certificate with an online unique verification number that your college or company you will be working with can use to check your certificate details online, a lifetime. Additionally, you can take a print of your certificate from anywhere.

Along with the certificate, you will be provided a Project Report which will have details like your work in the project, skills learned, etc. of all the projects and assignments done by you.

In that case, there are more reasons for you to take this course! This course is prepared from the basics. We will take you through the fundamentals of building a good understanding of automotive engineering. This will make you ready to take up tougher challenges in this space!

We believe something is better than nothing. 60% of concepts are based on calculations and the 40 percent part is based on design. So, even if you are unable to practice the designing part on a laptop, as you don't have one. No worries! These sessions will be there for you at least for 6 months. So, once your college starts, and you will have access to the CAD lab or any laptop, you can rewatch the sessions and practice.

Minimum RAM: 4 GB
Minimum Processor - i3 could work, i5 and above is recommended (Intel Processor)
If AMD Processor - A6 could work, however above it would be better
Recommended - Have an external mouse during design courses

To be eligible for the course, the following criteria need to be fulfilled:

Education Requirement: Should be able to understand Physics and Mathematics of Std. 12th and equivalent program (Diploma/other)
Course Program: You should successfully complete the course.

Money-back within 10-days of attending the course if you feel that this course isn't good and there is another course better than this at a lower price. Show us the other course and we will give you the money back.

Yes. EMI is available.

Any student studying in India and nationality Indian is an Indian Student. Every other student comes under 'Abroad'. Yes, you can pay in USD i.e. US Dollars ($)

We help students with cutting edge technologies by Experts from top Industry experts. Frankly speaking, no-one in India is providing such a detailed course at the prices we’re offering. 
Also, we're making a promise, if you find a course more detailed given with better services than ours and at a lower cost, we will refund your whole amount :) 

No, there is no limit both in terms of the number and amount of referrals. You can share with as many friends as you wish to.

Regular Projects:
After completion of every module (6-9 videos), you will be given one industry-related project on major concepts you have learned in that particular module.

Major Project Post Completion of Course:
You can also opt for a 1-month industry-based online project (without any extra fee/ charges) after the completion of the course. This project will involve in-depth use of multiple subsystems with the given inputs or modifying of the current design for a different application of the vehicle.
This project has to be done individually.

Regular Project: Yes, it is compulsory to do all the regular projects because they will be graded.

Major Project: We have no compulsion for you to do this project, it's all on your interest and time. If you want to do it, you can do it and get an extra certificate.

You will receive tutorial videos of 30-40 minutes every day/ alternative day.
If you have exams or other commitments and miss any video/ assignment you can attempt it later as per your ease because you will have access to the content for 1 year.
Time to completion can vary based on your schedule, but most learners are able to complete it within the course period itself.

This course is designed keeping in mind the uncertainties & exams around academics.
All the sessions will be saved in your login panel for 1 year so you can watch them anytime as per your convenience. You can start the course now. There will be regular doubt sessions and assignment reviews to ensure you don't miss out on anything.

We understand the uncertainty due to Corona and for that, we have introduced a 60 days Course Pause feature. Through this, you can pause and extend your course for up to 60 days and easily continue with your college and semester exams, even if the college reopens in between the course.

You will get the video at the start of the given day i.e. midnight 12:00 AM.